Loading...

Loading...

Tinsorb S in sunscreens

Tinosorb S Sunscreen

Geschrieben von: Dr. Leslie Baumann

|

|

Lesezeit 10 min

New Sunscreen Ingredient Tinsorb S

Living in sunny Miami, sunscreen isn’t just a seasonal accessory—it's a daily necessity. As a dermatologist, I've seen firsthand how the relentless sun can affect skin health. That's why the potential U.S. approval of Bemotrizinol (Tinosorb S), a new sunscreen ingredient long used in Europe, is exciting news for anyone seeking broad-spectrum UV protection.

What is Tinsorb S

What is Tinosorb S?

Tinosorb S, or Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, is a cutting-edge chemical sunscreen ingredient that may soon be found in sunscreens in the US. It's not just any sunscreen; it's a safe broad-spectrum SPF that efficiently absorbs both UVA and UVB rays, helping prevent sunburn and long-term skin damage. This new sunblock reflects some UV rays away from the skin while converting the rest into harmless heat.

Names for Tinosorb S

To find this new sunscreen Tinosorb S, look for the iNCI name is Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine so you will see that name or Tinosorb S on the product label.

Other names for Tinosorb S are:

  • 2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-phenol]
  • Bemotrizinol
  • Bemotrizinoli
  • Bemt
  • Bis-ethylhexyloxyphenol Methoxyphenyl Triazine
  • Bis-octyloxyphenol Methoxyphenyl Triazine
  • Phenol, 2,2'-[6-(4-Methoxyphenyl)-1,3,5-triazine-2,4-diyl]bis[5-[(2-ethylhexyl)oxy]-
  • Tinosorb S
  • Trianilino-p-carboxyethylhexyl Triazine
  • Uvinul T 150
Safety of Tinsorb S

Safety

Bemotrizinol has been used since 2000 in Europe and is considered very safe. It is rated as a "1" by the EWG. In  In 1999, SCCS confirmed that there was no evidence that this compound was toxic or very allergenic. (6)

Safety to Humans

 There are no concerns about hormone disruption or skin irritation. In fact, studies show it causes less contact dermatitis compared to other similar ingredients.

Safety to Marine Life and Reefs

Besides being safe for human use, Tinosorb S is also environmentally friendly. It is considered reef-safe, which means it does not contribute to the degradation of coral reefs, a significant issue with some other chemical sunscreens.

Benefits of Tinsorb S

Benefits

The reason there is so much excitement about the new sunscreen bemotrizinol is that it has many benefits and few downsides. The benefits are:

  • Broad spectrum
  • Photostable
  • Minimal system absorption
  • Minimal allergy risk

Tinosorb S provides broad-spectrum protection, covering both UVA and UVB rays effectively. Its photostability ensures that it doesn't break down in the sun, providing reliable protection throughout the day. Moreover, it does not penetrate the bloodstream, adding an extra layer of safety. It is one of the most popular sunblocks used for children in Poland.


Characteristics

This section addresses the concerns and downsides to many sunscreens. Tinosorb S has these characteristics:

  1. Opacity : Tinosorb S is not inherently opaque on the skin. It is sheer and blends well into sunscreen formulations without leaving the white cast typically associated with physical sunscreens like zinc oxide or titanium dioxide. 

  2. Formulation Challenges : Tinosorb S is considered relatively easy to formulate compared to some other UV filters. Its solubility and compatibility with other sunscreen agents allow it to be incorporated into a wide range of sunscreen products, including lotions, creams, and sprays. It is also used to stabilize other sensitive ingredients, enhancing the overall formulation.

  3. Comedogenicity :  This new sunscreen ingredient does not typically clog pores, making it suitable for use in sunscreens designed for all skin types, including those prone to acne. It is considered a noncomedogenic sunscreen.

  4. Stinging and Irritation : Tinosorb S does not commonly cause stinging or burning sensations when applied to the skin. Unlike some chemical sunscreens, it does not bind to TRP (transient receptor potential) receptors, which are responsible for mediating sensations such as pain, warmth, or itch. This lack of interaction reduces the risk of sensory irritation that can occur with other sunscreens.

Downsides and Side Effects

Tinosorb S has a few side effects:

  • Eye irritation: Many sunscreens can cause eye irritation and this has been reported with Tinosorb S so do not use a spray near your face. Instead, choose creams, lotions and sticks for your face.
  • Allergic reactions are not common but have been reported.

How it Works

Tinosorb S has a dual-action mechanism, distinguishing it from traditional organic sunscreens. Its molecular structure enables it to function both as a UV absorber and a UV reflector, thus providing comprehensive protection against the spectrum of ultraviolet radiation. As a UV absorber, Tinosorb S efficiently converts UV radiation into harmless heat through a process of photo-induced electron release and re-capture, which prevents the radiation from penetrating deeper skin layers and initiating cellular damage. Concurrently, its molecular configuration allows it to scatter and reflect UV rays, a characteristic more commonly associated with physical sunblocking agents like zinc oxide or titanium dioxide. This hybrid functionality not only enhances the broad-spectrum protection against both UVA and UVB rays but also contributes to the photostability of the compound, ensuring that it maintains its protective capabilities even after prolonged exposure to solar radiation. Moreover, Tinosorb S exhibits a high degree of photostability, resisting degradation and thereby maintaining its efficacy over time. This stability is particularly significant as it allows Tinosorb S to protect against photoaging and photocarcinogenesis, which are long-term risks of UV exposure. Additionally, its capability to stabilize other sunscreen ingredients enhances the overall formulation effectiveness, making Tinosorb S a valuable component in broad-spectrum sunscreen products.

Which wavelengths does Tinsorb S Block?

Which Wavelengths Does it Block?

Tinosorb S effectively blocks a wide range of ultraviolet light wavelengths, offering broad-spectrum protection. Here are the specifics in bullet points:

  • UVA Protection:

    • Tinosorb S covers the entire UVA range from 320 nm to 400 nm.
    • It has peak absorption at around 340 nm, providing robust protection against deep-penetrating UVA rays that contribute to skin aging and long-term damage.
  • UVB Protection:

    • Tinosorb S also offers comprehensive coverage in the UVB range from 280 nm to 320 nm.
    • It features a significant absorption peak at 310 nm, which is crucial for protecting against UVB rays that cause sunburn and direct DNA damage.

This broad-spectrum coverage is beneficial for preventing both immediate effects, like sunburn, and long-term issues such as photoaging and skin cancer.


Is Tinosorb S Good for Your Skin Type?

Understanding your specific skin type is crucial for selecting the right sunscreen. I encourage you to take the Baumann Skin Type Quiz to determine the best skincare products for your unique profile. This will ensure that you use a sunscreen that complements your skin's needs while offering optimal protection against the sun’s harmful rays.

[[ctaquiz]]

Tinsorb Sunscreen Comparison

Both Tinosorb M and Tinosorb A2B represent advancements in sunscreen technology, offering strong, broad-spectrum protection with safety profiles suitable for sensitive skin and during pregnancy. They differ slightly in their specific UV range focus and formulation characteristics but share common benefits in photostability, hypoallergenic properties, and environmental safety.

Table Comparing Benefits of Tinsorb M, S and A2B

Tinsorb M

Tinosorb M, scientifically known as Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (MBBT), is a sophisticated UV filter notable for its dual-action protection, combining organic and inorganic properties. It functions both by absorbing and reflecting UV radiation, offering broad-spectrum coverage against both UVA and UVB rays. Its unique attribute is its microfine structure, which allows it to remain on the skin's surface, enhancing its photostability and efficacy. Tinosorb M is recognized for its minimal skin penetration, reducing concerns about systemic exposure and making it safe for use during pregnancy. It does not exhibit endocrine-disrupting effects, further affirming its safety profile. In sunscreen formulations, it is often paired with Avobenzone to stabilize the latter, thereby preventing Avobenzone's rapid degradation in sunlight. This synergistic combination results in enhanced photostability. Despite being hypoallergenic and suitable for sensitive skin, Tinosorb M is not inherently waterproof and may require specific formulation adjustments, such as the addition of film-forming agents, to improve its water resistance. Regarding environmental impact, Tinosorb M is considered to be marine and reef safe, aligning with increasing regulatory and consumer demand for environmentally friendly sunscreen ingredients.

It is approved in Europe but as of May 2024, was not yet approved in the USA.

Tinsorb A2B

Tinosorb A2B, another advanced sunscreen ingredient, further expands the range of UV protection by specifically addressing the UVB and short UVA range. Like Tinosorb M, Tinosorb A2B is also photostable and designed to be safe for sensitive skin, including during pregnancy. It does not absorb into the skin, minimizing systemic exposure and associated risks. Additionally, Tinosorb A2B does not show any evidence of endocrine disruption. Its formulation is designed to complement other UV filters, enhancing the overall stability and effectiveness of sunscreens. Tinosorb A2B's inclusion in sunscreens helps achieve comprehensive protection across a broader spectrum of UV light, making it a valuable component in full-spectrum sunscreens. Its efficacy and safety profile also make it a preferred choice for formulations aimed at protecting sensitive and vulnerable populations. Similar to Tinosorb M, it is considered marine and reef safe, adhering to environmental guidelines and consumer preferences for sunscreens that do not harm aquatic ecosystems.

Comparison Summary of Tinsorb Types

When comparing the different types of Tinsorb, these are the differences inthe available forms:

  • UV Protection Range : Tinosorb A2B offers the broadest coverage, targeting both UVB and short UVA rays effectively.
  • Formulation Characteristics : Tinosorb M can be formulated to improve water resistance, though it is not inherently the most water-resistant. It forms a microfine layer that helps it remain on the skin surface, but due to its larger particle size, it tends to be more opaque compared to the others.
  • Cosmetic Elegance : Tinosorb S is known for its excellent cosmetic elegance, being the sheerest of the three. This makes it preferred in formulations seeking minimal visibility on the skin.
  • Hypoallergenic Properties : All Tinosorbs are generally hypoallergenic, but Tinosorb M, staying mostly on the skin's surface, might be considered the least likely to cause allergic reactions due to minimal skin penetration.

I hope you enjoyed this blog.  Feel free to ask our Skincare concierge AI bot any questions you have on this article.  It can also help you shop for Tinsorb sunscreens once Tinsorb is approved for use in the United States- which we all hope will happen soon.

Level up your skin care knowledge with medical advice from dermatologists

Is Tinsorb sunscreen approved in the US?

By May 4, 2024, none of the Tinsorb sunscreens have been approved in the USA.

Is Tinsorb safe for pregnancy?

All of the Tinsorb sunscreens are safe for pregnancy because they are not absorbed systemically.

Is Tinsorb sunscreen safe for children?

The Tinsorb sunscreens are the most popular types of sunscreens used for children in Europe due to the strong safety profile and lack of absorption.

Is Tinsorb reef safe?

Tinsorb sunscreen has not been shown to bleach coral or have harmful effects on marine life.

Why is Tinsorb S a good sunscreen?

Tinsorb S does not absorb into the body which makes it safe.  It is stable in sun and is not a strong allergen. The EWG rates it as a 1 (the safest).

Does Tinsorb S cause free radicals when exposed to sun?

Tinosorb S does not cause the formation of free radicals when exposed to UV light. Unlike some other chemical UV filters that can sometimes generate free radicals upon UV radiation exposure, Tinosorb S is designed to be photostable. It absorbs UV radiation and dissipates the energy as heat, rather than generating free radicals. This makes it a preferable option in sunscreens for providing stable, broad-spectrum UV protection without contributing to oxidative stress in the skin.

Are the Tinsorb sunscreens comedogenic?

Tinsorb itself is not comedogenic, however whether a sunscreen product is comedogenic or not depends on the overall formulation. To find a noncomedogenic sunscreen, read the label or shop ournoncomedogenic sunscreen collection.

Best References and Scientific Publications on Bemotrizinol:

  1. Baumann L. Sunscreens in Ch. 46 of Baumann's Cosmetic Dermatology Ed 3. (McGraw Hill 2022)
  2. Ashby, J., Tinwell, H., Plautz, J., Twomey, K., & Lefevre, P. A. (2001). Lack of binding to isolated estrogen or androgen receptors, and inactivity in the immature rat uterotrophic assay, of the ultraviolet sunscreen filters Tinosorb M-active and Tinosorb S. Regulatory Toxicology and Pharmacology34(3), 287-291.
  3. The presence of structurally diverse chemicals as contaminants in the environment has led to concerns regarding their possible endocrine disturbing effects. Recently, some ultraviolet absorbing components of sunscreen preparations have given positive responses in assays monitoring estrogen-like activity both in vitro and in vivo. Consequently, two recently developed sunscreen components, Tinosorb M-active and Tinosorb S, were evaluated using the in vitro estrogen and androgen receptor competitive binding assays. Neither compound gave a positive response in either of the assays, consistent with the large molecular dimensions of each chemical disfavoring binding to the hormone receptors. Both of the chemicals were inactive in immature rat uterotrophic assays conducted using the subcutaneous route of administration. It is concluded that neither of these agents possess intrinsic estrogenic/antiestrogenic or androgenic/antiandrogenic activity. The several positive control chemicals evaluated gave the expected positive responses in the assays used.
  4. Santander Ballestín, S.; Luesma Bartolomé, M.J. Toxicity of Different Chemical Components in Sun Cream Filters and Their Impact on Human Health: A Review. Appl. Sci. 202313, 712.
  5. Varrella, S.; Danovaro, R.; Corinaldesi, C. Assessing the eco-compatibility of new generation sunscreen products through a combined microscopic-molecular approach. Environ. Pollut. 2022314,
  6. Opinion of the Scientific Committee on Cosmetic Products and Non-Food Products Intended for Consumers Concerning 2,4-Bis-{[4-(2-ethyl-hexyloxy)-2-hydroxy]-phenyl}-6-(4-methoxyphenyl)-(1,3,5)-triazine. 17 February 1999.
  7. D'Ruiz, C. D., Plautz, J. R., Schuetz, R., Sanabria, C., Hammonds, J., Erato, C., ... & Mesaros, S. (2023). Preliminary clinical pharmacokinetic evaluation of bemotrizinol-A new sunscreen active ingredient being considered for inclusion under FDA's over-the-counter (OTC) sunscreen monograph. Regulatory Toxicology and Pharmacology139, 105344.
  8. Jana, K., & Mahanti, B. (2023). Determination of Bemotrizinol degradation in different stress condition by high performance liquid chromatography in sunscreen preparations.
  9. Candido, T. M. (2023). Development, safety and efficacy of sunscreen systems composed of rosmarinic acid, bemotrizinol and octyl p-methoxycinnamate (Doctoral dissertation, Universidade de São Paulo).